CLEARAUDIO BASIC V2 PHONO STAGE
Its predecessor, the basic plus, was a multiaward winner and with the V2 we’ve taken all of that coveted ‘Plus’ technology up a notch
There’s nothing basic about the basic V2 phono stage. Don’t be fooled by its cool, minimalist design. Within that sleek aluminum casing (with silver or black anodized finish) lies an inner world of highly refined features. Its predecessor, the basic plus, was a multiaward winner and with the V2 we’ve taken all of that coveted ‘Plus’ technology up a notch.
On the outside, we’ve kept it very simple. There’s just one visible control, a single power switch on the upper surface that opens up a raft of possibilities. On the underside you can switch between moving coil and moving magnet mode. From there, you can easily enjoy the basic V2 with almost any high-end phono cartridge without making any further adjustments.
Or, you can choose from a range of performance enhancing settings to fine-tune its parameters to your system and your heart’s content. An optional subsonic filter attenuates any unwanted low frequency noise, while RIAA equalization accuracy is within 0.1 dB.
All of which adds up to the basic V2 being the perfect all-rounder for both audiophiles and music lovers.
TOTAL WEIGHT
Approx. 1.2 kg (Preamp and power supply)
DIMENSIONS
Preamp
Width
4.65 inches
Depth
5.71 inches
Height
1.65 inches
Power Supply
Width
3.94 inches
Depth
2.17 inches
Height
3.46 inches
MATERIAL/COLOR
Silver & Black
Specifications
Amplification @ 1 kHz | 44 dB (MM mode) 63 dB (MC mode) |
Input impedance | 47 kOhm / 220 pF / MM mode 510 Ohm / 220 pF / MC mode |
MM / MC input | switchable (on bottom panel) |
RIAA | delay time: 75 μs / 318 μs / 3180 μs |
RIAA accuracy | ± 0.1 dB |
Distortion | 0.001% (IEC A) |
Signal to noise ratio | 89 dB (MM Mode) 74 dB (MC Mode) |
Channel separation | > 92 dB (@ 1 kHz) / opposed channel hot-wired |
Max. output voltage | 10.5 V (@ 1 kHz) |
Subsonic filter | 20 Hz: –3 dB / Oct |
Power supply | ± 18 V DC (external power supply) |
Output connections | Unbalanced (RCA) Balanced (XLR) |
Power consumption | Max. consumption: 6.6 Watt Consumption in operation: 6.6 Watt Off mode: 0.0 Watt (turned off at rear panel) |
Total weight | Approx. 1.8 Kg (Preamplifier) Approx. 2.5 kg (Power supply) |
Dimensions (W/D/H in inches) | Preamp: 7.09 x 8.66 x 2.17 Power Supply: 7.09 x 7.28 x 2.17 |
Dimensions (W/D/H in mm) | Preamp: 180 x 220 x 55 Power Supply: 180 x 185 x 55 |
Warranty | 3 years* * Only if the Manufacturer’s guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio. |
How to find us
Contact Us to book a demo in our Elland Listening room.